SBC MT 01 Spécifications télécharger pdf (Page 131)

MT SBC 01

129

MT SBC 01

1 Keep the pushbutton pressed until a confirmation tone sounds (this

operation is only possible in with the system in standby and the handset on

the hook; otherwise the signalling LED will flash to warn the user).

2 Press and release the Pushbutton :

once (a confirmation tone sounds) to change the call ringtone from external

unit.

twice (2 confirm tones emitted) to change the switchboard call tone.

three times (3 confirmation tones sound) to change the door bell ringtone.

If the pushbutton is pressed again the above sequence will repeat. After

the last time the Pushbutton is pressed, wait for a confirmation tone

before passing on to the following stage.

3 Press and release the Pushbutton to scroll the different tones available.

Keep the pushbutton pressed to hear the same tone repeatedly .

4 Lift the handset and replace it to confirm selection of the last ringtone heard and

to exit (at any time) from ‘change ringtone’ mode.

On exiting ‘change ringtone’ mode, a confirmation tone will be given.

1 Keep the pushbutton pressed until a confirmation tone sounds (this

operation is only possible with the system in standby mode; otherwise the

signalling LED will flash to warn the user).

2 Press and release the Pushbutton :

once (a confirmation tone sounds) to change the call ringtone from external unit.

twice (2 confirm tones emitted) to change the switchboard call tone.

three times (3 confirmation tones sound) to change the door bell ringtone.

If the pushbutton is pressed again the above sequence will repeat.

After the last time the Pushbutton is pressed, wait for a confirmation

tone before passing on to the following stage.

3 Press and release the Pushbutton to scroll the various tones

available in sequence. Keep the pushbutton pressed to hear the same tone

repeatedly .

4 Press the button to confirm the selection of the last ringtone that was

heard and to exit (at any time) the monitor tone selection mode. On exiting

monitor ringtone change mode a confirmation tone will sound.

Automatic Switch-on function (recommended only for systems with 1 or 2

entrances). The monitor is switched on either by pressing and immediately

releasing pushbutton 2 (if the factory settings have been kept) or by pressing

pushbutton Art. 1251/A, which has this function. Automatic switch-on is possible

only when the system is in standby.

Automatic switch-on can be disabled. To disable the function, press and hold the

monitor automatic switch-on pushbutton for more than 6 sec.

When the setting has been made, a single confirmation tone will be emitted.

To enable the function, keep the same pushbutton pressed for more than

4 seconds. In this case, a double confirmation tone is heard.

VARIANT F

Changing ringtones on Art. 5702 and 2618.

VARIANT G

Changing Art. 4780 ringtones.

VARIANT H

Automatic switch-on Art. 4780, Art. 5702 and Art. 5802.

1 2 ... 126 127 128 129 130 131 132

Commentaires sur ces manuels

Pas de commentaire

SBC MT 01 Spécifications Page 131

Commentaires sur ces manuels